SP932U USB 2048x1536 CMOS 190-1100 nm Laser Beam Profiler

Products
Software
Features
FAQS
Accessories
Resources
Contact Us

Overview

USB 3.0 Global Shutter CMOS, high resolution Camera, with improved accuracy, especially at popular NIR and Nd:YAG wavelengths with BeamGage new "Blooming Correction" Algorithm. Compact, square design to increase setup versatility

2048 x 1536 pixel resolution with a 3.45 µm pixel pitch
24 fps at full resolution
New "Blooming Correction" algorithm at NIR and no smearing
BeamGage Standard or Professional software included
Requires Win 10, 64 bit or higher

See All Features

Products

		Compare	Model	Compatibility	sortOrder	rankScore	ranking	Drawings, CAD & Specs		Spectral Range	Beam Size	Sensor Type	Elements	Availability	Featured Item	Price		Brand
		SP90606 BGS-USB3-SP932U BeamGage Standard software Show	SP90606 BGS-USB3-SP932U BeamGage Standard software	UNIVERSAL	0.0	1.0	0.0		0.0	190-1100 nm	34.5μm 5.3mm	Silicon CMOS	2048 x 1536	Show				Ophir
		SP90607 BGP-USB3-SP932U BeamGage Professional software Show	SP90607 BGP-USB3-SP932U BeamGage Professional software	UNIVERSAL	0.0	1.0	0.0		0.0	190-1100 nm	34.5μm 5.3mm	Silicon CMOS	2048 x 1536	Show				Ophir

Show All

BeamGage Standard

BeamGage Standard is our full-function software with an extensive set of ISO quantitative measurement, our patented UtraCal™ algorithm for the highest accuracy measurements in the industry.

BeamGage Professional

BeamGage Professional has all of the functionality that BeamGage Standard includes. BeamGage Professional supports all of our beam profiling cameras, includes window partitioning to allow analysis of multiple beams on a single camera, and includes an automation interface written in .NET to push data to your custom applications.

Specifications

Product Name

SP932U
Spectral Range

190-1100 nm
Beam Size

34.5μm 5.3mm
Communication Interface

USB 3.0
Sensor Type

Silicon CMOS
Compatible Light Sources

CW, Pulsed
Active Area

7.06mm x 5.3mm
Elements

2048 x 1536

Effective Pixel Pitch

3.45μm x 3.45μm
Dynamic Range

72 dB
Full Resolution Frame Rate

24fps
Saturation Intensity

32μW/cmᒾ at 633nm, 500μW/cmᒾ at 1064nm
UKCA Compliance

Yes
China RoHS Compliance

Yes
Communication

Yes

Features

BeamGage^® Laser Profiling Software

BeamGage^® comes in two versions: Standard and Professional. Each builds off of the next adding additional capability and flexibility as needed for adapting to almost any configuration requirement. The software performs rigorous data analyses on the same parameters, in accordance with the ISO standards, providing quantitative measurement of numerous beam spatial characteristics. Pass/Fail limit analysis for each of these parameters can be also applied.

BeamGage^® Software Measurements

ISO Standard Beam Parameters
Dslit, Denergy, D4σ
Centroid and Peak location
Major and Minor Axis
Ellipticity, Eccentricity
Beam Rotation
Gaussian Fit
Flat-top analysis / Uniformity
Divergence
Pointing stability

Laser Beam Profiler Accessories

When performing beam profiling measurements on a laser, it is sometimes necessary to manipulate the beam in order to achieve a signal that is suitable to be measured. Occasionally, the beam needs to be sized correctly by either increasing it if it is too small, or increasing it if it is too large. Often times, the laser’s power needs to be reduced to a certain level to be imaged. Our laser beam profiler accessories allow you to achieve proper beam sizes and power levels so that you can achieve the most accurate measurements possible.

Designing Laser Beam with BeamMaker

BeamMaker helps engineers, technicians, and researchers understand a beam's modal content by creating a theoretically generated beam. Design your perfect beam profile in BeamMaker by specifying the mode, size, width, height, intensity, angle, and noise content - then configure your laser to run the as designed, and compare your actual beam to the theoretically derived measurements. The end result is knowledge about how much the real beam varies from the desired beam.

Frequently Asked Questions

What is the advantage of the SP932U camera?
Answer
CMOS sensor used in the SP932U camera has an advantage over CCD Ophir cameras due to the possibility of faster measurement speed and lack of Smearing Effect.

Why SP932U camera is the most suitable for NIR wavelengths beam profiling?
Answer
SP932U exploits a special mathematical algorithm to remove the "Blooming Effect" at 1000-1100nm.
Each camera is specially calibrated to remove the blooming and provide precise beam profiling measurement at popular NIR and Nd: YAG ranges.

I just purchased a BeamGage SP932U system and there is a menu for Blooming Correction. What is this and why should I use it?
Answer
The SP932U camera uses a CMOS imager and, because of the way CMOS imagers are made, there is the potential for blooming artifacts to become more prevalent than CCD imagers. The best way to avoid any blooming artifacts is to use a sensor that is not silicon-based, such as an InGaAs imager. But if changing to a different sensor is not possible, BeamGage provides a mathematical Blooming Correction algorithm for this camera to correct for these artifacts. For more information, please contact our Product Support Department at service.ophir.usa@mksinst.com or review section C.1.4 in the BeamGage manual.

Frequently Asked Questions

What is the advantage of the SP932U camera?
Answer
CMOS sensor used in the SP932U camera has an advantage over CCD Ophir cameras due to the possibility of faster measurement speed and lack of Smearing Effect.

Why SP932U camera is the most suitable for NIR wavelengths beam profiling?
Answer
SP932U exploits a special mathematical algorithm to remove the "Blooming Effect" at 1000-1100nm.
Each camera is specially calibrated to remove the blooming and provide precise beam profiling measurement at popular NIR and Nd: YAG ranges.

I just purchased a BeamGage SP932U system and there is a menu for Blooming Correction. What is this and why should I use it?
Answer
The SP932U camera uses a CMOS imager and, because of the way CMOS imagers are made, there is the potential for blooming artifacts to become more prevalent than CCD imagers. The best way to avoid any blooming artifacts is to use a sensor that is not silicon-based, such as an InGaAs imager. But if changing to a different sensor is not possible, BeamGage provides a mathematical Blooming Correction algorithm for this camera to correct for these artifacts. For more information, please contact our Product Support Department at service.ophir.usa@mksinst.com or review section C.1.4 in the BeamGage manual.

Accessories

Description	Compatibility
Camera Trigger Optical Sensor	UNIVERSAL	Learn More
Neutral Density C-Mount Filters	UNIVERSAL	Learn More
LBS-300s Beam Splitter for Laser Beam Profilers	UNIVERSAL	Learn More
CCTV Camera Lens For Front Imaging	UNIVERSAL	Learn More
Near Field Analysis Beam Profiler	UNIVERSAL	Learn More
4X Beam Reducer for Beam Profilers	UNIVERSAL	Learn More
4X UV Image Reducing Converter for Beam Profilers	UNIVERSAL	Learn More
4X Beam Expander for Beam Profilers	UNIVERSAL	Learn More
Microscope Objectives for Beam Profilers	UNIVERSAL	Learn More
Stackable Prism Front-Surface Beam Samplers	UNIVERSAL	Learn More
Stackable Wedge Beam Splitters	UNIVERSAL	Learn More
Beam Tap I & II Dual Surface Reflectors	UNIVERSAL	Learn More
Wide Laser Beam Imager	UNIVERSAL	Learn More