Showing 33 products in 7 families
Products Here
Manual

 

This document only applies to computers running either both Windows 7 which will be running a Pyrocam III in either the Pyrocam Control Console or BeamGage.

Technical Note

Installing the Pyrocam III

in general we recommend to not use 4-pin on-board 1394 FireWire ports (that can be found on some laptop computers) since they tend to be less reliable and/or cause the Pyrocam III to …

Manual

 

The Pyrocam IIIHR is a high performance, solid-state, pyroelectric camera that features a 12mm imager (160 x 160 pixels) and 16-bit A/D converter. This enables reliable measurement …

Manual

 

The Pyrocam IV is a high performance, solid-state, pyroelectric camera that features a large 25mm imager (320 x 320 pixels) and 16-bit A/D converter. This enables reliable measurement …

Blog Post

Watch: Pyrocam Measures IR and UV Lasers

This video explains why the Spiricon Pyrocam pyroelectric camera is the camera of choice for laser beam diagnostics of IR and UV lasers and high temperature thermal imaging for scientific …

Blog Post

Watch: Ophir Spiricon Pyrocam Product Tour

This video offers quick introductions to Ophir-Spiricon laser beam profiling products for additive manufacturing, high-power lasers using CCD cameras or non-contact measurement devices, …

Video

Pyrocam Pyroelectric Beam Profiler Camera Overview

This video explains why the Spiricon Pyrocam pyroelectric camera is the overwhelming camera of choice for laser beam diagnostics of IR and UV lasers and high temperature thermal imaging …

Video

Ophir-Spiricon Product Tour

This video offers quick introductions to Ophir-Spiricon laser beam profiling products for additive manufacturing, high-power lasers using CCD cameras or non-contact measurement devices, …

Blog Post

A Quick Guide to Profiling Small Laser Beams

When using a camera to profile your laser, it’s important to keep the ratio of laser size / pixel size higher than 20. Not only does this increase the resolution of your profile image, …

Blog Post

DiaMonTech Develops Non-invasive Blood Glucose Monitor That Uses M-IR Lasers

More than 400 million people worldwide suffer from diabetes. For them, the ability to measure blood glucose levels non-invasively (without piercing the skin) would be an enormous relief. …

Blog Post

Terahertz Technology- New Challenges, New Solutions / reviewed by Ivker

Terahertz (=THz) radiation is electromagneticradiation located between the low-frequency far-infrared and the high-frequencymicrowave parts of the spectrum (from 0.3 to 3 x 1012 Hz, …

Blog Post

Watch: BeamSquared Auto ISO

In case you haven't got the chance to come across it yet, the BeamSquared® system is a compact and fully automated tool for measuring the propagation characteristics of CW and pulsed …

Blog Post

Don’t Come to Our LASER World of PHOTONICS Booth Unless…

Going to Munich for LASER World of PHOTONICS 2015?We’ll be showing several new products in Munich, not to mention quite a few of our classics.But…You’re going to be busy. You can’t …

Blog Post

Beam Profiler Detectors: Which Material Should I Use?

When choosing a beam profiler there are many decisions one must consider, one of them being which type of detector to use. This is mainly a function of wavelength, but there are some …

Blog Post

Measurement tools for Terahertz (THz) technology

Ophir Spiricon offers both a beam profiler and a power sensor for Terahertz wavelength radiation. To learn more about Terahertz Laser Measurement products go to: http://bit.ly/2tsOMZhOver …

Application Notes

Non-invasive Blood Glucose Monitor

Many non-invasive methods for measuring blood glucose have failed because they were not accurate enough: Glucose values in body fluids such as tears, saliva or sweat do not correlate …

Technical Note

Pyroelectric Technology in Laser Sensors and Beam Analyzers

Ophir Photonics uses pyroelectric detectors in a number of their products, both for beam profiling and for laser power measurement.

Technical Article

Laser Beam Diagnostics in GHz Applications

When working with exotic optical wavelengths and unusually low average powers, relying on one standard measurement technology is typically not sufficient. Each technology can offer …

Manual

 

The Optical Camera Trigger is an optical sensor that detects pulsed light sources and generates an output to trigger a camera or similar device. It provides two types of outputs – TTL …

Application Notes

Laser Forensics: The Invisible, Revealed and Measured

The underlying operational principle is based on the fact that residues of body fluids, natural oils and sweat absorb radiation in the infrared range.